Renthal Handlebar
Fitting Instructions
It is very very important when
fitting the handlebars that any sharp
edges are removed from the handlebar
fitting clamps where they come in contact
with the handlebar (see illustrations).
Failure to remove these sharp edges could
lead to a fatigue failure.
It is
also important when the handlebar is
fitted and the handlebar fitting bolts
are fully tightened that there is a gap
showing between the clamps at both the
front and the rear (see illustration).
| To ensure that the
handlebars are fitted centrally
to the triple top clamps, two
parallel aligning rings are
pressed into the metal of the
handlebar. Line these up with an
equal gap between the rings and
the handlebar fitting clamps (see
illustration). 
TechTips:
Main Menu
|
|
